Vicky

No, the device requires a network connection to stream video. The Vision AI Box VA1 acts as a pass-through for the Smart Network Camera IPC, meaning it forwards the video stream in real time but do...

The devices are equipped with RJ45 Ethernet ports and support only wired connections. They use DHCP by default. To access video from the Smart Network Camera IPC, ensure that both it and the Vision...

Micro-USB Cable Splitter 1. Product Overview The UbiBot Micro-USB Cable Splitter converts a single Micro-USB port into two Micro-USB female ports. It can be used with UbiBot WS1 and WS1 Pro devices...

 1. Using a Micro-USB Cable Splitter with WS1 Pro / WS1 Pro-L A Micro-USB Cable Splitter can be connected to either Micro-USB port on the WS1 Pro or WS1 Pro-L. When connected to Micro-USB 1, one en...

After the device is successfully configured, network latency may cause a delay in data uploads. Please try the following troubleshooting steps:The system has a default data synchronization interval...

No. Without an internet connection, the DPL1 cannot perform time synchronization, which means the timestamps of the collected data will be inaccurate. For this reason, it is not recommended to oper...

LoRa communication offers a range of up to 1 kilometer in in clear line-of-sight conditions.If data transmission is temporarily interrupted, the device will store the collected data locally and aut...

Yes. UbiBot LoRa devices are designed with robust local storage capabilities, allowing them to continue collecting and saving data even when the network connection is interrupted. The LoRa gateway ...

The LoRa gateway GW1 series can connect to up to 100 LoRa Sensors, and each LoRa Sensors can be bound to multiple gateways at the same time.

Watch video on YouTube : WiFi Configuration Guide for all UbiBot devices-New Version