Before you start using the external probe, please set it up on the console(https://console.ubibot.com)
- Select the device you are using with the external probe and enter the settings page on the console.
- Click “Sensor Display Setting”.
- Select a sensor field from field7 – 10 to edit. (note: field 1 – 6 are built-in sensors, field 7 – 10 are for external sensors).
- Select the external probe you use from the options and click save
- Click “Data Management”, where you can set the data upload frequency of the external probe.
Comments
0 comments
Please sign in to leave a comment.