I. Installation
- Install UbiBotOPP
- Double click “UbiBotOPPSetup”.
- Select setup language, click [Next].
- Select destination location. The default installation path is “C:\UbibotOpp”, then click [Next].
- Select additional tasks, then click [Next].
- Click [Install].
- Click [Finish].
- Double click “UbiBotOPPSetup”.
- Run UbiBotOPP
Double click UbiBotOPP, then click [Start]. The operating status will turn green.Note: If the system prompts that the port is occupied, please click the Settings button to modify the port.
- Privatization Environment Parameter Setting
- Click the ServerURL. After the first installation, the page will jump to the setting page. If you need to modify the settings later, please go to http://127.0.0.1/system/.
- Upload the license which download in the App Center.
After the upload, the key information will be shown on the page. - If no special setting is needed, please click [DB Link Test] to check whether the database is connected.
Note: [Import database] will overwrite the privatized data and is recommended only for the first installation.
After click [Import Database], please click [DB link test] again to confirm the database link is successful.
- Click [Submit], then it will jump to the console platform.
- Click the ServerURL. After the first installation, the page will jump to the setting page. If you need to modify the settings later, please go to http://127.0.0.1/system/.
II. Activate the device
- Install the CH340 driver
- Double click “CH341SER”.
- Click [Install].
- Double click “CH341SER”.
- Install PC Tool
- Double click “PcToolsIO Setup 1.2.1”.
- Click [Install].
- Click [Finish].
- Double click “PcToolsIO Setup 1.2.1”.
- Activate device
Please ensure that the device to be activated is not bound. If not, restore the factory setting of the device first.- Double click PC Tool.
- Connect the device to the computer with a USB cable.
- Click [Server Setup].
- Click [Start].
- Enter the host, port and backup IP, then click [Next].
- Host:the host name set in the key.
- Port: 80(default). If the port in UbiBotOPP has been modified, please fill in the new port number.
- Backup IP: the IP address set in the key.
- WiFi setup. Choose the network, set the Network SSID and password, then click [Start Setup]. After the setup, the device will be shown in the console platform.
- Double click PC Tool.
III. Log in the console
Access http://127.0.0.1/ (local server only) or the specified host address, such as http://192.168.1.44.
The default user name is admin, and password is 123456.
Click [Data Warehouse], the activated devices are shown in the page.
Comments
0 comments
Please sign in to leave a comment.